Purchasing Office in USA!
For USA brands, Direct shipping from USA to worldwide destination！
NEWS
PIE Thermocouple Calibrators
Release Time：
2025-07-08 16:51
source：
PIE has a thermocouple calibrator to fit your needs from the PIE 520B single type thermocouple simulator to the advanced troubleshooting capabilities of the PIE 422Plus. Have you had issues in the past where your thermocouple calibrator wouldn’t work with some of the instruments in your plant? Our thermocouple calibrators are guaranteed to be compatible with all process thermocouple inputs including all brands of smart temperature transmitters, PLC input cards, DCS systems and multichannel recorders.
PIE thermocouple calibrators have fuse-less protection, rugged design, and long battery life. The PIE 422, 422Plus and 525B display in °F and °C along with the millivolt value from the temperature vs. millivolt thermocouple tables. The PIE 322-1, 422 & 525B have sockets for fast connections using miniature thermocouple plugs as well as brass blocks and screws for attachment of stripped thermocouple wires. The brass blocks also add stability to the NIST traceable cold junction reference, a high precision thermistor (±0.05 °C) rated for 11 years!
The PIE 422Plus adds a FULL function milliamp calibrator plus it reads and sources 14 thermocouple types. It also includes PIE’s patented Leak Detection to find hidden problems in 4 to 20 milliamps loops.
The PIE 525B sources and measures 12 RTD types along with 14 thermocouple types. Additional features on the PIE 525B include high resolution to 0.01°, automatic detection of 2, 3 and 4 wire RTDs, and can display the excitation current used by the RTD instrument to measure an RTD sensor.
The PIE 525Plus adds a full diagnostic milliamp calibrator to the PIE 525B. Standalone RTD & Thermocouple transmitter calibration is possible with the simultaneous display of the output temperature while powering up the transmitter and displaying the output milliamp reading. Uniquely measures the resistance of a thermocouple sensor while indicating the temperature of the probe. It also includes PIE’s patented Leak Detection to find hidden problems in 4 to 20 milliamps loops.
NEWS
Discover the Incredible Benefits of the DL INSTRUMENTS Model 1201 Low Noise Voltage Preamp for Enhanced Electronic Measurements Table of Contents 1. Introduction to the DL INSTRUMENTS Model 1201 2. Understanding Low Noise Technology 3. Key Features of the Model 1201 3.1 Superior Noise Performance 3.2 Wide Frequency Response 3.3 Versatile Input Options 3.4 User-Friendly Design 4. Applications of th
JFW -Converting from 50 Ohm to 75 Ohm | Resistive VS Reactive
Connecting 50 Ohm and 75 Ohm devices and equipment can be a hassle. When building up a RF test bed sometimes this impedance mismatch between components and test equipment is unavoidable. Here are two different types of impedance matching models that can resolve this hassle.
Understanding the DL1211 Current Preamplifier: Key Insights for Electronic Measurement
The DL1211 Current Preamplifier is designed to amplify low-level currents, making it an indispensable component in various electronic measurement applications. It serves as a critical interface between signal sources and measurement devices, ensuring that weak signals are sufficiently strengthened for accurate analysis. This amplification is vital in fields such as research, telecommunications, an
Moore Industries -The SLA Earns FM Approval for Hazardous Areas
At Moore Industries, we’re excited to announce that our SLA Multiloop and Multifunctional Safety Logic Solver and Alarm has earned Factory Mutual (FM) approval as a Non-Incendive instrument. This certification allows the SLA to operate in Class I, Division 2, Groups A, B, C, and D Hazardous locations in the United States and Canada, making it a reliable safety shutdown choice for environments with potentially explosive gases, vapors, dust, or fibers.
Simpson 228 AC/DC Leakage Current Tester
Test for dangerous leakage current with the Simpson Model 228, designed to meet the latest UL, IEC, and ANSI specifications. The 228 detects both AC and DC leakage current and simulates human response at three different levels — reaction, let-go, and burn hazard. Each Model 228 comes with test leads with alligator clips, manual, and batteries.
How do the XRV-124 and XRV-100 address AAPM Task Group 142 (TG-142) guidelines?
The Logos Systems X-ray and Proton beam camera phantoms perform fast and accurate machine Quality Assurance (QA) tests while saving you time and expense.
Hours of Operation: Mon-Fri 8am to 8pm
Room 806, Building 1, Yesun Technology Park, Pingshan, Shenzhen, China
